
IP30 19" Rack Mountable Industrial L2/L4 24-Port 10/100/1000T + 4-Port 10G SFP+ Managed Switch (-40~75 degrees C, redundant power input on 100~240V AC and 24~60V DC terminal block, DIDO, Type-C console port, 802.1Q VLAN, IGMP Snooping, TLSv1.2, SSHv2
The estimated delivery time is provided by the carriers. It allows you to determine the expected date when your order will reach you.






> Physical Port
> .24 10/100/1000BASE-T Gigabit Ethernet RJ45 ports
> .4 10GBASE-SR/LR SFP+ slots, backward compatible with 100/1G/2.5GBASE-X SFP transceivers
> .One USB Type C console interface for basic management and setup
> Hardware Conformance
> .One 100 to 240V AC or dual 24 to 60V DC power input, redundant power with reverse polarity protection
> ..Active-active redundant power failure protection
> ..Backup of catastrophic power failure on one supply
> ..Fault tolerance and resilience
> .19-inch rack-mountable design
> .Supports EFT protection for 6KV DC power and 6KV DC Ethernet ESD protection
> Digital Input and Digital Output
> .2 digital input (DI)
> .2 digital output (DO)
> .Integrate sensors into auto alarm system
> .Transfer alarm to IP network via SNMP trap
> Switching
> .Hardware-based 10/100Mbps (half/full duplex), 1000Mbps (full duplex mode), auto-negotiation, and auto MDI/MDI-X
> .Features Store-and-Forward mode with wire-speed filtering and forwarding rates
> .IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
> .16K MAC address table size
> .12K jumbo frame
> .Automatic address learning and address aging
> .Supports CSMA/CD protocol
> Layer 2 Features
> .Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
> .High performance Store and Forward architecture, broadcast storm control, and runt/CRC filtering that eliminates erroneous packets so as to optimize the network bandwidth
> .Supports VLAN
> .Supports Spanning Tree Protocol
> ..STP (Spanning Tree Protocol)
> ..RSTP (Rapid Spanning Tree Protocol)
> ..MSTP (Multiple Spanning Tree Protocol)
> ..STP BPDU Guard, BPDU Filtering and BPDU Forwarding
> .Supports Link Aggregation
> ..IEEE 802.3ad Link Aggregation Control Protocol (LACP)
> ..Cisco ether-channel (Static Trunk)
> ..Maximum 8 trunk groups, up to 8 ports per trunk group
> .Provides port mirror (many-to-1)
> .Loop protection to avoid broadcast loops
> .Supports ERPS (Ethernet Ring Protection Switching)
> .Link Layer Discovery Protocol (LLDP)
> Quality of Service
> .Ingress/Egress Rate Limit per port bandwidth control
> .Traffic classification
> ..IEEE 802.1p CoS
> ..TOS/DSCP/IP Precedence of IPv4/IPv6 packets
> .Strict priority and Weighted Round Robin (WRR) CoS policies
> Security
> .Storm Control support
> ..Broadcast / Multicast / Unknown Unicast
> .Authentication
> ..Built-in RADIUS client to co-operate with the RADIUS servers
> ..DHCP Option 82
> ..RADIUS/TACACS+ login user access authentication
> .Access Control List
> .MAC Security
> .Port Security for Source MAC address entries filtering
> .DHCP Snooping to filter distrusted DHCP messages
> .Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
> .IP Source Guard prevents IP spoofing attacks
> .DoS Attack Prevention





























