PLANET IGS-620TF network switch Unmanaged Gigabit Ethernet (10/100/1000) Blue

> Physical Port

> Four 10/100/1000BASE-T RJ45 ports with auto MDI / MDI-X function

> Two SFP interfaces, supporting 100/1000/2500BASE-X transceiver type auto detection

> Fiber Port Redundancy

> Automatically detects link status and redundancy on dual ports with the same connector type

> Only primary port is active at a time, while the backup port is blocked

> When primary port link failure occurs, the traffic will swap to backup port automatically

> Once the primary-port status is back to link up, the traffic will swap from backup port to primary port

> Layer 2 Features

> Supports auto-negotiation and 10/100Mbps half / full duplex and 1000Mbps full duplex mode

> High performance Store and Forward architecture, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth

> IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation

> 9K Jumbo Frame size support

> Backplane (Switching Fabric): 18Gbps

> Integrated address look-up engine, supporting 4K absolute MAC addresses

> Automatic address learning and address aging

> IEEE 802.1Q VLAN transparency

> CSMA/CD Protocol

> Industrial Case and Installation

> Slim IP30 metal case protection

> DIN-rail, wall-mount or side wall-mount design for redundant power design

> 12 to 48V DC, redundant power with reverse polarity protection

> AC 24V power adapter acceptable

> Supports 6000 VDC Ethernet ESD protection

> Minus 40 to 75 degrees C operating temperature