PLANET IGS-5227-6T network switch Managed L2+ Gigabit Ethernet (10/100/1000) Black

> Physical Port

> 6-port 10/100/1000BASE-T, waterproof and dustproof RJ45 copper

> Hardware Conformance

> IP67-rated aluminum case

> Redundant power design

> 9 to 48V DC, redundant power with polarity reverse protect function

> Active-active redundant power failure protection

> Backup of catastrophic power failure on one supply

> Fault tolerance and resilience

> 24V AC power input acceptable

> DIN-rail and wall-mount design

> Supports Ethernet ESD protection of 6000V DC

> Supports -40 to 75 degrees C operating temperature

> Layer 3 IP Routing Features

> Supports maximum 32 static routes and route summarization

> Layer 2 Features

> Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)

> High performance of Store-and-Forward architecture, and runt/CRC filtering that eliminates erroneous packets to optimize the network bandwidth

> Storm control support

> Broadcast/Multicast/Unicast

> Supports VLAN

> IEEE 802.1Q tagged VLAN

> Up to 255 VLANs groups, out of 4095 VLAN IDs

> Provides Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)

> Private VLAN Edge (PVE)

> Protocol-based VLAN

> MAC-based VLAN

> IP subnet-based VLAN

> Voice VLAN

> Supports Spanning Tree Protocol

> IEEE 802.1D Spanning Tree Protocol (STP)

> IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)

> IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), spanning tree by VLAN

> BPDU Guard

> Supports Link Aggregation

> 802.3ad Link Aggregation Control Protocol (LACP)

> Cisco ether-channel (static trunk)

> Maximum 3 trunk groups, with 2 ports for each trunk

> Up to 4Gbps bandwidth (full duplex mode)

> Provides port mirror (many-to-1)

> Port mirroring monitors the incoming or outgoing traffic on a particular port

> Loop protection to avoid broadcast loops

> Supports ITU-T G.8032 ERPS (Ethernet Ring Protection Switching)

> IEEE 1588 and Synchronous Ethernet network timing

> Quality of Service

> Ingress shaper and egress rate limit per port bandwidth control

> 8 priority queues on all switch ports

> Traffic classification

> IEEE 802.1p CoS- ToS/DSCP/IP precedence of IPv4/IPv6 packets

> IP TCP/UDP port number

> Typical network application

> Strict priority and Weighted Round Robin (WRR) CoS policies

> Traffic-policing policies on the switch port

> DSCP remarking

> Multicast

> Supports IGMP snooping v1, v2 and v3

> Supports MLD snooping v1 and v2

> Querier mode support

> IGMP snooping port filtering

> MLD snooping port filtering

> MVR (Multicast VLAN Registration)

> Security

> Authentication

> IEEE 802.1x port-based/MAC-based network access authentication

> IEEE 802.1x authentication with guest VLAN

> Built-in RADIUS client to cooperate with the RADIUS servers

> RADIUS/TACACS+ users access authentication

> Access Control List

> IP-based Access Control List (ACL)

> MAC-based Access Control List (ACL)

> Source MAC/IP address binding

> DHCP Snooping to filter distrusted DHCP messages

> Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding

> IP Source Guard prevents IP spoofing attacks

> IP address access management to prevent unauthorized intruder