> Physical Port

> ．8 10/100/1000BASE-T ports with 95W 802.3bt PoE++ injector function (Ports 1 to 8)

> ．16 10/100/1000BASE-T ports with 32W 802.3at PoE+ injector function (Ports 9 to 24)

> ．4 10GBASE-SR/LR SFP+ slots, backward compatible with 100/1G/2.5GBASE-X SFP transceivers (Ports XG1 to XG4)

> ．RJ45 to DB9 console interface for switch basic management and setup

> Pro AV Design

> ．LED indicators on the front panel and cabling at the back enhance visual appeal and facilitate installation

> ．Dual UI design features a streamlined Pro AV interface and a conventional standard UI

> ．Pre-configured IGMP snooping enables instant multicasting functionality upon powering on

> ．Pre-configured Dante and NDI templates simplify the configuration process for immediate plug-and-play capability

> ．Fanless mode eliminates the fan noise, ensuring disturbance-free operation

> Switching

> ．Hardware-based 10/100Mbps (half/full duplex), 1000Mbps (full duplex), auto-negotiation and auto MDI/MDI-X

> ．IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation

> ．16K MAC address table size

> ．12K jumbo frame

> ．Automatic address learning and address aging

> Some of the features listed below are only available in the standard UI

> Power over Ethernet

> ．Compliant with IEEE 802.3bt Power over Ethernet Plus Plus

> ．8 ports supporting IEEE 802.3bt PoE++ with each offering up to 95 watts (ports 1-8)

> ．16 ports supporting IEEE 802.3at PoE+ with each offering up to 32 watts (ports 9-24)

> ．Total PoE power budget of 480 watts

> ．Automatic detection of powered devices (PD)

> ．Built-in circuit protection to prevent power interference between ports

> ．Remote power feeding up to 100 meters

> ．Advanced PoE management capabilities:

> ．．Total PoE power budget control

> ．．Per port PoE function enable/disable

> ．．PoE port power feeding priority

> ．．Per PoE port power limitation

> ．．Detection of PD classification

> ．Intelligent PoE features

> Layer 2 Features

> ．Supports VLAN

> ．Supports Spanning Tree Protocol

> ．Supports Link Aggregation

> ．Supports port mirror (many-to-1)

> ．Loop protection to avoid broadcast loops

> ．Supports ERPS (Ethernet Ring Protection Switching)

> ．Link Layer Discovery Protocol (LLDP)

> Management

> Pro AV UI Specific Settings

> ．Intuitive Network Profile (VLAN) setup

> ．．Color-coded groups for straightforward identification

> ．．Pre-set profile templates

> ．．Dante, NDI, Data

> ．．IGMP querier designation

> Standard UI

> ．IPv4 and IPv6 dual stack management

> ．SNMP Management

> ．．Four RMON groups (history, statistics, alarms and events)

> ．．SNMP trap for interface link up and link down notification

> ．User privilege levels control

> ．Built-in Trivial File Transfer Protocol (TFTP) client

> ．Static and DHCP for IP address assignment

> ．System maintenance

> ．．Firmware upload/download via HTTP/TFTP

> ．．Configuration upload/download through HTTP/TFTP

> ．．Dual images

> ．．Hardware-based reset button for system reboot or reset to factory default

> ．SNTP Network Time Protocol

> ．Network Diagnostic

> ．Link Layer Discovery Protocol (LLDP) and LLDP-MED